LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Explorer 4.6 8, RWD >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate ENGINE - 4.0L SOHC or ENGINE - 4.6L (3V) for the specification.
  1. Use a telescoping gauge to determine the ID of the connecting rod bushing, if equipped.
    Fig 1: Checking Connecting Rod Bushing Diameter
    G06064087Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
Fig 2: Checking Connecting Rod Bushing Diameter Using Telescoping Gauge With Micrometer
G06064088Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals