Door Alignment - Front: Material
WARNING: This page is about a different car, the 2010 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
ITEM SPECIFICATION
| Item | Specification |
|---|---|
| Multi-Purpose Grease XG-4 and/or XL-5 |
ESB-M1C93-B |
All alignments
- Remove the door latch striker plate.
Front door in and out, up and down alignment
- Loosen, but do not remove, the front door hinge-to-front door fasteners enough to allow door alignment.
Front door fore, aft and tilt alignment
- Loosen, but do not remove, the front door hinge-to-body fasteners enough to allow door alignment.
All alignments
- Adjust the door. For additional information on dimensions, refer to BODY REPAIRS .
- Tighten the door fasteners.
- Tighten the front door hinge-to-front door fasteners to 48 Nm (35 lb-ft).
- Tighten the front door hinge-to-body fasteners to 28 Nm (21 lb-ft).
- Install and adjust the door striker as necessary. For additional information, refer to STRIKER ADJUSTMENT .
- Lubricate the door latch using the specified lubricant.