ABS with AdvanceTrac®: Notes
WARNING: This page is about a different car, the 2010 Ford Focus. However, it is still accessible from the selected car via links, so may be relevant.
The ABS with AdvanceTrac® system consists of the same components as the conventional ABS above with the following additional components:
- Stability control sensors - located under the front floor console, in front of the gear selector lever assembly, and contains several sensors (yaw rate, lateral and longitudinal accelerometers).
- Stability/traction control switch - located in the instrument panel center finish panel and is serviced separately from the finish panel.
- Steering wheel rotation sensor and sensor ring assembly - the rotation sensor and ring assembly is a sealed unit that is located on the backside of the clockspring and is serviced separately from the clockspring.
The AdvanceTrac® system is made up of the following 2 distinct vehicle systems; traction control and Electronic Stability Control (ESC).