LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2010 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission - Automatic Transaxle/Transmission >> In-Vehicle Repair >> Overdrive Servo >> Installation

Overdrive Servo: Installation

  1. Install the O/D  servo piston assembly.
    1. Install the O/D  servo piston return spring.
    2. Install the O/D  servo piston assembly.
      Fig 1: Installing Overdrive Servo Piston Assembly
      G06140205Courtesy of FORD MOTOR CO.
  2. Use the Servo Piston Remover/Installer to install the O/D  servo piston retaining ring.
    Fig 2: Compressing Servo Spring
    G06140203Courtesy of FORD MOTOR CO.
  3. Install the main control valve body. For additional information, refer to MAIN CONTROL VALVE BODY .
    4. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM . Failure to follow these instructions may result in serious personal injury.
  4. If equipped with a fire suppression system, repower the system.
scientia non olet · About LEMON Manuals