LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Fusion S, Standard >> Repair and Diagnosis >> Transmission >> Manual Trans >> Manual Transmission External Controls System >> Removal And Installation >> Gearshift Cables >> Installation

Gearshift Cables: Installation

    NOTE: When inserting the gearshift cables through the dash panel, make sure the arrow on the grommet is pointing upward.
  1. Carefully install the shift cables into position. Do not damage the shift cable retainers.

    To install, reverse the removal procedure.

  2. Adjust the gearshift cables. For additional information, refer to MANUAL TRANSAXLE/TRANSMISSION AND CLUTCH - GENERAL INFORMATION article.
scientia non olet · About LEMON Manuals