LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Focus S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Knob >> Installation

Selector Lever Knob: Installation

  1. Route the wiring harness through the selector lever bezel and position the selector lever knob and shroud onto the selector lever.
    2. Fig 1: Positioning Selector Lever Knob
    GF0043403Courtesy of FORD MOTOR CO.
  2. Install the 2 selector lever knob screws.
    • Tighten to 2 Nm (18 lb-in).
    3. Fig 2: Identifying Screws
    GF0043399Courtesy of FORD MOTOR CO.
  3. Slide the selector lever knob shroud up.
    4. Fig 3: Sliding Selector Lever Knob Shroud Up
    GF0043404Courtesy of FORD MOTOR CO.
    NOTE: Selector lever assembly removed for clarity.
  4. Connect the TCS electrical connector.
  5. Install the center console trim cover.
    6. Fig 4: Identifying Center Console Trim Cover
    GF0043405Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals