LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Focus S, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls >> Removal And Installation >> Selector Lever Bezel >> Removal

Selector Lever Bezel: Removal

  1. Remove the center console trim cover.
    1. Lift the arm rest.
    2. Apply the parking brake.
    3. Lift the center console trim cover straight up, remove the emergency brake lever from the boot and remove the trim cover.
    2. Fig 1: Identifying Center Console Components
    GF0043396Courtesy of FORD MOTOR CO.
    NOTE: Selector lever assembly removed for clarity.
  2. Disconnect the Transmission Control Switch (TCS) electrical connector.
    3. Fig 2: Identifying (TCS) Connector
    GF0043397Courtesy of FORD MOTOR CO.
  3. Using a suitable tool, slide the selector lever knob shroud down.
    4. Fig 3: Sliding Selector Lever Knob Shroud Down Using Tool
    GF0043398Courtesy of FORD MOTOR CO.
  4. Remove the selector lever knob screws, selector lever knob and the shroud.
    5. Fig 4: Identifying Screws
    GF0043399Courtesy of FORD MOTOR CO.
  5. Rotate the Transmission Range (TR) indicator light bulb socket counterclockwise and remove the TR indicator light bulb from the selector lever bezel.
    6. Fig 5: Identifying Selector Lever Bezel
    GF0043400Courtesy of FORD MOTOR CO.
  6. Release the 3 tabs and remove the selector lever bezel.
    7. Fig 6: Identifying Tabs
    GF0043401Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals