LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Repair >> Transaxle Filler Tube >> Installation

Transaxle Filler Tube: Installation

    NOTE: Coolant hoses removed for clarity.
  1. Install the transmission fluid filler tube and the nut.
    • Tighten to 11 Nm (97 lb-in).
      Fig 1: Locating Transmission Fluid Cooler Tube
      G06067991Courtesy of FORD MOTOR CO.
    2. NOTE: Coolant hoses removed for clarity.
    Fig 2: Locating Transmission Fluid Level Indicator
    G06067990Courtesy of FORD MOTOR CO.
  2. Install the transmission fluid level indicator.
  3. Route the coolant hoses to their position on the transmission fluid filler tube.
    Fig 3: Locating Coolant Hoses
    G06067989Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals