LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Flex SE >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Diagnosis And Testing >> Preliminary Inspection >> Material

Preliminary Inspection: Material

MATERIAL SPECIFICATION

Item Specification
MERCON® V Automatic Transmission Fluid
XT-5-QM (or XT-5-QMC) (US); CXT-5-LM12 (Canada)
(Early build vehicles)
MERCON® V
Motorcraft® MERCON® LV Automatic
Transmission Fluid
XT-10-QLV
(Late build vehicles)
MERCON® LV
NOTE: The use of any transmission fluid other than what is recommended for this transaxle will cause transaxle damage. Refer to the MATERIAL  specification and/or the transmission fluid level indicator for the correct fluid. Use only clean transmission fluid designated for this transaxle and torque converter being serviced.
NOTE: Do not mix Mercon® V or Mercon® LV transmission fluid. This may cause erratic shift feel, erratic shift timing and/or transmission failure.
NOTE: Transmission fluid application:
  • Early build vehicles require MERCON® V
  • Late build vehicles require MERCON® LV

The following items must be checked prior to beginning the diagnostic procedures.