LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Edge SEL, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1439 (Front Disc Brake System) >> Removal And Installation >> Brake Disc >> Installation

Brake Disc: Installation

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean any rust or foreign material from brake disc and wheel hub.
    • Use specified brake parts cleaner to clean the front brake disc and hub surfaces.
  2. Apply a thin coat of anti-seize lubricant to the hub flange.
  3. Install the brake disc.
  4. Install a new brake disc screw.
    • Tighten to 20 Nm (177 lb-in).
  5. Position the brake caliper and brake caliper anchor plate assembly and install 2 new bolts.
    • Tighten to 150 Nm (111 lb-ft).
  6. Install the wheel and tire. For additional information, refer to WHEELS & TIRES .
scientia non olet · About LEMON Manuals