LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 2378 (Automatic Transmission - 5R110W - General Procedures, In-Vehicle Repair, Removal, Disassembly, Disassembly And Assembly Of Subassemblies, Assembly, Installation) >> Disassembly And Assembly Of Subassemblies >> Input Shell Assembly >> Check

Input Shell Assembly: Check

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
  1. Clean and inspect the forward/reverse sun gear and input shell assembly. Check the sun gear teeth, lug teeth and thrust surface for damage. If any evidence of damage is found, a new input shell assembly must be installed.
    Fig 1: Locating Input Shell Assembly
    G06141030Courtesy of FORD MOTOR CO.
  2. Inspect the front bushing for damage. If any damage is found a new input shell assembly must be installed.
    Fig 2: Locating Front Bushing
    G06141031Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals