LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Edge SE, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1432 (Charging System) >> Removal And Installation >> Generator >> Removal

Removal And Installation: Generator: Removal

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the battery. For additional information, refer to BATTERY, MOUNTING AND CABLES .
  2. Position the generator protective cover aside, remove the B+ nut and position the B+ terminal aside.
  3. Disconnect the generator electrical connector and position the harness aside.
  4. Remove the cooling fan assembly. For additional information, refer to ENGINE COOLING .
  5. Rotate the accessory drive belt tensioner and remove the accessory drive belt from the generator.
  6. Remove the upper generator nut and stud.
  7. Loosen the lower generator bolt.
  8. Remove the generator.
scientia non olet · About LEMON Manuals