LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Edge Limited, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1448 (Engine Mechanical) >> In-Vehicle Repair >> Engine Mount >> Removal

Engine Mount: Removal

WARNING: This page is about a different car, the 2009 Ford Flex. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the exhaust flexible pipe. For additional information, refer to EXHAUST SYSTEM .
    2. NOTE: The Oil Pan Holding Fixture must be carefully aligned to the mounting bosses on the oil pan. Failure to follow this instruction may result in damage to the oil pan.
    Fig 1: Positioning Floor Jack And Oil Pan Holding Fixture Under Oil Pan
    G06062079Courtesy of FORD MOTOR CO.
  2. Position a floor jack and the Oil Pan Holding Fixture under the oil pan.
  3. Remove the engine coolant degas bottle. For additional information, refer to ENGINE COOLING .
  4. Detach the wiring harness retainer from the engine mount bracket stud bolt.
  5. Remove the nut, bolt and engine mount brace.
  6. Remove the 4 engine mount nuts.
  7. Remove the 4 engine mount studs.
  8. Remove the 3 bolts and the engine mount.
scientia non olet · About LEMON Manuals