LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2009 >> Edge Limited, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1767 (Auxiliary Brake System) >> Removal And Installation >> Trailer Brake Control (TBC) Module >> Removal

Trailer Brake Control (TBC) Module: Removal

WARNING: This page is about a different car, the 2009 Ford RV Cutaway, 2009 Ford Econoline, 2009 Ford E450 Super Duty, and 2009 Ford Cutaway. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE: Care must be taken not to damage the coin tray/storage bin, switch assembly (if equipped) or finish panel during removal.
  1. Using a small screwdriver, or similar tool, remove the coin tray/storage bin (or switch assembly if equipped) by prying out on the RH side of the tray/bin.
    • If equipped with a switch assembly, disconnect the electrical connector.
  2. Pull the Trailer Brake Control (TBC) module out of the instrument panel and disconnect the electrical connector.
scientia non olet · About LEMON Manuals