LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Taurus SEL, FWD >> Repair and Diagnosis >> Accessories & Equipment >> Communication Devices >> MULTIFUNCTION Electronic Modules System >> Removal And Installation >> Driver Seat Module (DSM) >> Removal And Installation

Removal And Installation

  1. Remove the driver seat. For additional information, refer to SEATING article.
  2. If equipped, position the dual climate control seat module (DCSM) aside.
  3. Disconnect the driver seat module (DSM) electrical connectors.
  4. Using a drill, remove the 2 rivets and the DSM.
  5. To install, reverse the removal procedure.
    • Use the special tool to install the 2 rivets.
scientia non olet · About LEMON Manuals