Vehicle Dynamic Systems
- Specifications
- Description And Operation
- Diagnostic Tests
- Anti-Lock Control
- Anti-Lock Control - Traction Control and Stability Assist
- Notes
- Principles of Operation
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Notes
- Pinpoint Test G: DTCs B1317 and B1318 - Battery Voltage High/Low
- Pinpoint Test H: DTCs C1095 and C1096 - ABS Hydraulic Pump Motor Circuit Failure/Open
- Pinpoint Test I: ABS False Activation, ABS too Sensitive, ABS Activates On a Normal Stop
- Pinpoint Test J: Vehicle Pulls During Braking or ABS False Activation/too Sensitive/Activates On a Normal Stop
- Pinpoint Test K: DTCs B1104, C1277 and C1278 - Steering Wheel Angle Sensor Fault and DTC C1963 - Stability Control Inhibit Warning
- Pinpoint Test L: DTCs C1279, C1280, C1281, C1282, C1516, C1517, C1963, C2769, C2770 and U0028 - Sensor Cluster Fault and Vehicle Communication Bus Off
- Pinpoint Test M: DTC C1288 - Pressure Transducer Main/Primary Input Circuit Failure
- Pinpoint Test N: DTC C1446 - Base Brake Failure/Brake Switch Stuck or Inoperative
- Pinpoint Test O: DTC C1991 - Module Calibration Failure
- Pinpoint Test P: The Traction Control System Cannot Be Disabled/Enabled or the Traction Control System is Inoperative
- Pinpoint Test Q: The Traction Control OFF Indicator (in the Switch) is Always/Never On
- Removal And Installation