LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> RV Cutaway 6.0 P >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamic Systems >> Removal And Installation >> Stability Control Sensor Cluster >> Removal And Installation

Removal And Installation

  1. Disconnect the stability control sensor cluster electrical connector.
  2. Remove the 2 stability control sensor cluster bolts.
    • To install, tighten to 6 Nm (53 lb-in).
  3. Remove the stability control sensor cluster.
  4. To install, reverse the removal procedure.
    • Calibrate the ABS module. Follow the scan tool directions.
scientia non olet · About LEMON Manuals