Removal And Installation
NOTE:
It is not necessary to remove the Audio Control Module (ACM) to retrieve the part number. For additional information, refer to Audio Unit Part Number Retrieval .
NOTE:
If installing a new navigation ACM, remove the navigation DVD, if possible, before sending the ACM to an authorized audio system repair facility.
- Upload the ACM configuration information to the scan tool. For additional information, refer to MODULE CONFIGURATION article, to carry out Programmable Module Installation (PMI).
- Remove the instrument panel center finish panel. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
- Remove the 4 screws and the ACM.
- Disconnect the electrical connectors and the antenna lead-in cable.
- To install, reverse the removal procedure.
- Download the configuration information to the ACM. For additional information, refer to MODULE CONFIGURATION article, to carry out PMI.
NOTE:
Module configuration is only required if a new ACM is being installed.