LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> In-Vehicle Servicing >> Transmission Support Crossmember >> Removal

Transmission Support Crossmember: Removal

  1. With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING article.
  2. Remove the catalytic converter. For additional information, refer to EXHAUST SYSTEM article.
  3. Support the transmission with a transmission jack.
  4. Remove the transmission crossmember-to-floor pan screws.
    5. Fig 1: Locating Transmission Crossmember-To-Floor Pan Screws
    G03982786Courtesy of FORD MOTOR CO.
  5. Remove the transmission insulator-to-extension housing center screw.
    6. Fig 2: Locating Transmission Mount Center Screw
    GF0015487Courtesy of FORD MOTOR CO.
  6. Remove the transmission crossmember.
scientia non olet · About LEMON Manuals