LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Fusion SE, 3.0 1, AWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 1421 (Cruise Control System - Speed Control) >> Removal And Installation >> Speed Control Deactivator Switch >> Removal And Installation

Removal And Installation

WARNING: This page is about a different car, the 2009 Mercury Milan, 2009 Lincoln MKZ, and 2009 Ford Fusion. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the electrical connector.
  2. Rotate the speed control deactivator switch counterclockwise one-quarter turn.
  3. Remove the speed control deactivator switch.
    4. NOTE: When installing the speed control deactivator switch, it is automatically self-adjusting to the correct position. Do not pull up or push down on the pedal during installation. Initial installation of the speed control deactivator switch allows for one adjustment. If additional adjustments are necessary, install a new switch.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals