LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Focus SE, 4D Sedan, Standard >> Repair and Diagnosis >> Brakes >> Traction Control >> Vehicle Dynamic Systems >> Removal And Installation >> Anti-Lock Brake System (ABS) Module >> Removal And Installation

Removal And Installation

  1. Remove the hydraulic control unit (HCU). For additional information, refer to Hydraulic Control Unit (HCU) .
  2. Remove the 4 ABS module-to-HCU screws and the ABS module.
    • To install, tighten to 2 Nm (18 lb-in).
  3. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals