LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Focus S, 4D Sedan, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission External Controls System >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

  1. Remove the center console trim cover.
    1. Lift the arm rest.
    2. Apply the parking brake.
    3. Lift the center console trim cover straight up, remove the emergency brake lever from the boot and remove the trim cover.
    2. Fig 1: Identifying Center Console Trim Cover Components
    GF0043396Courtesy of FORD MOTOR CO.
    NOTE: Selector lever assembly removed for clarity.
  2. Disconnect the Transmission Control Switch (TCS) electrical connector.
    3. Fig 2: Identifying Connector
    GF0043397Courtesy of FORD MOTOR CO.
  3. Using a suitable tool, slide the selector lever knob shroud down.
    4. Fig 3: Sliding Selector Lever Knob Down Using Tool
    GF0043398Courtesy of FORD MOTOR CO.
  4. Remove the selector lever knob screws, selector lever knob and the shroud.
    5. Fig 4: Identifying Screws
    GF0043399Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals