LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Focus S, 2D Coupe, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Speed Control >> Removal And Installation >> Speed Control Switch >> Removal And Installation

Removal And Installation

  1. Remove the driver air bag module. For additional information, refer to SUPPLEMENTAL RESTRAINT SYSTEM article.
  2. Remove the speed control switch harness ground screw.
  3. Disconnect the speed control switches electrical connector.
  4. Remove the speed control switch by pulling the switch toward the rear of the vehicle.
  5. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals