- The universal transmitter is inoperative
|
- Wiring, terminals or connectors
- Universal transmitter
- Receiver unit
|
|
- The universal transmitter indicator flashes slowly when the programmed button is pressed
|
- The universal transmitter is in train mode
- The remote transmitter is not programmed to this button
|
|
- The universal transmitter indicator flashes rapidly for 2 seconds, then solidly illuminates when the programmed button is pressed
|
- The universal transmitter is programmed to a rolling code signal and the receiver is not synchronized
|
|
- The universal transmitter indicator illuminates solidly when the programmed button is pressed
|
- The universal transmitter is programmed to another fixed code device
- The universal transmitter is not cleared before programming by holding the 2 outer buttons
|
|