Window Glass - Rear Quarter: Installation

All vehicles 

1. Apply 8 mm (0.32 in) Foam Core Butyl or equivalent meeting Ford specification WSB-M3G143-B1 to the rear quarter window glass frame.
   • Start at the bottom middle and work around the frame.
2. Install the rear quarter window glass.
   1. Position the rear quarter window glass.
   2. Install the rear quarter window glass nuts.
   3. Tighten to 2 N.m (18 lb-in).
Fig 1: Identifying Nuts & Rear Quarter Window Glass
Courtesy of FORD MOTOR CO.
3. If equipped, install the air duct.
   • Install the pin-type retainer.
Fig 2: Locating Pin-Type Retainer
Courtesy of FORD MOTOR CO.
4. Connect the audio antenna.
Fig 3: Locating Audio Antenna
Courtesy of FORD MOTOR CO.

Vehicles with power vent windows 

5. Install the rear quarter window regulator.
Fig 4: Locating Retaining Clip
Courtesy of FORD MOTOR CO.
6. Install the bolts and rear quarter window regulator motor.
   • Tighten to 9 N.m (80 lb-in).
   • Connect the electrical connector.
Fig 5: Locating Bolts On Rear Quarter Window Regulator
Courtesy of FORD MOTOR CO.

All vehicles 

7. Position the headliner and install the coat hooks.
8. Install the rear quarter trim panel. For additional information, refer to INTERIOR TRIM AND ORNAMENTATION article.