LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Expedition 4WD >> Repair and Diagnosis >> Brakes >> Traction Control >> Anti-Lock Brake System >> Removal And Installation >> Stability/Traction Control Switch - Expedition >> Removal And Installation

Removal And Installation

  1. Remove the lower instrument panel center finish panel.
  2. Remove the upper instrument panel center finish panel.
    • Disconnect the electrical connectors.
  3. Press the 4 tabs and remove the stability/traction control switch assembly.
    4. Fig 1: Traction Control Switch Assembly Tabs
    GF0022479Courtesy of FORD MOTOR CO.
  4. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals