Symptom Chart

WARNING: This page is about a different variant/trim than selected.

Symptom Chart

Condition	Possible Sources	Action
Accelerator pedal is hard to push down or has a rough or sticky feel	Damaged accelerator cable	NOTE: Do not lubricate the accelerator cable. INSTALL a new accelerator cable. REFER to Accelerator Cable - 2.3L or Accelerator Cable - 3.0L (4V) .
	Accelerator cable	CHECK the accelerator cable for correct installation.
	Worn or damaged throttle body	INSTALL a new throttle body. REFER to FUEL CHARGING AND CONTROLS - 2.3L article or FUEL CHARGING AND CONTROLS - 3.0L (4V) article.
	Damaged accelerator pedal and shaft	INSTALL a new accelerator pedal and shaft. REFER to Accelerator Pedal and Shaft .
Accelerator pedal shaft lever sticks (does not return freely)	Damaged accelerator cable	INSTALL a new accelerator cable. REFER to Accelerator Cable - 2.3L or Accelerator Cable - 3.0L (4V) .
	Accelerator cable	CHECK the accelerator cable for correct installation.
	Weak or broken throttle body shaft spring	INSTALL a new throttle body. REFER to FUEL CHARGING AND CONTROLS - 2.3L article or FUEL CHARGING AND CONTROLS - 3.0L (4V) article.
	Worn or damaged throttle body	INSTALL a new throttle body. REFER to FUEL CHARGING AND CONTROLS - 2.3L article or FUEL CHARGING AND CONTROLS - 3.0L (4V) article.
High engine idle speed	Damaged accelerator cable	INSTALL a new accelerator cable. REFER to Accelerator Cable - 2.3L or Accelerator Cable - 3.0L (4V) .
	Accelerator cable incorrectly installed	CHECK the accelerator cable for correct installation.
	Electrical/mechanical/ vacuum	REFER to the Introduction - Gasoline Engines article.
	Idle air control (IAC) valve	INSTALL a new IAC. REFER to ELECTRONIC ENGINE CONTROLS - 2.3L article or ELECTRONIC ENGINE CONTROLS - 3.0L (4V) article.