LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Crown Victoria S, 4.6 W >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine >> In-Vehicle Servicing >> Flexplate >> Installation

In-Vehicle Servicing: Flexplate: Installation

  1. Position the flexplate and loosely install the 6 bolts. Tighten the bolts in the sequence shown in illustration to 80 Nm (59 lb-ft).
    2. Fig 1: Tightening Sequence
    GF0046697Courtesy of FORD MOTOR CO.
  2. Install the transmission. For additional information, refer to AUTOMATIC TRANSAXLE/TRANSMISSION - 4R70E/4R75E article.
    3. WARNING: If the vehicle is equipped with a fire suppression system, repower the system. For important safety warnings and procedures, refer to FIRE SUPPRESSION SYSTEM article. Failure to follow these instructions may result in serious personal injury.
  3. If equipped with fire suppression system, repower the system.
scientia non olet · About LEMON Manuals