LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Crown Victoria Police Interceptor >> Repair and Diagnosis >> Body & Frame >> Mirrors >> Electronic Compass System >> General Procedures >> Compass Zone Adjustment

Compass Zone Adjustment

  1. Refer to the compass calibration zone map to select the correct compass zone setting for the geographic location of the vehicle. See Fig 1.
    2. Fig 1: Compass Calibration Zone Map
    GF0001426Courtesy of FORD MOTOR CO.
  2. With the key in the ON position, press and hold the MODE button for approximately 5 seconds until VAR appears on the display. Release the MODE button.
    3. NOTE: After approximately 5 seconds, the compass display will exit the VAR mode after the MODE button has been released.
  3. Within 5 seconds of releasing the MODE button, momentarily press and release the MODE button to increase the zone increment by one. Set the zone display number to match the vehicle geographical location on the compass calibration zone map . See Fig 1.
  4. Release the MODE button for 5 seconds to exit the zone setting mode.
scientia non olet · About LEMON Manuals