LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2008 >> Crown Victoria Base, 4.6 W >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Piston Pin Bore Diameter

Piston Pin Bore Diameter

    NOTE: Piston and piston pins are a matched set and should not be interchanged.
  1. Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.
    2. Fig 1: Identifying Directions For Measuring Piston Pin Bore Diameter
    GF0000190Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals