LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Taurus SEL >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transmission >> Disassembly And Assembly Of Subassemblies >> Drive Sprocket/Turbine Shaft >> Disassembly

Drive Sprocket/Turbine Shaft: Disassembly

  1. Remove the drive sprocket/turbine shaft seal and O-ring.
    • Remove the drive sprocket/turbine shaft O-ring.
    • Remove the drive sprocket/turbine shaft seal.
    2. Fig 1: Drive Sprocket/Turbine Shaft O-Ring & Seal
    GF0020296Courtesy of FORD MOTOR CO.
  2. Inspect the bearing race for wear. If the bearing is worn, a new drive sprocket/turbine shaft will need to be installed.
    3. Fig 2: Bearing Race
    GF0020297Courtesy of FORD MOTOR CO.
  3. Remove the turbine shaft front seal.
    4. Fig 3: Turbine Shaft Front Seal
    GF0020298Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals