Section 263 (Evaporative Emissions)
WARNING: This page is about a different car, the 2005 Mercury Sable and 2005 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
- Specifications
- Description And Operation
- Diagnosis And Testing
- Evaporative Emission System
- Special Tool(s)
- Principles of Operation
- Evaporative Emission (EVAP) Canister Purge Valve
- Evaporative Emission (EVAP) Canister
- Canister Vent Solenoid
- Fuel Tank Pressure (FTP) Sensor
- Fill Limiting Vent-(FLVV)
- Fuel Vapor Vent (FVV) Valve Assembly
- Fuel Filler Pipe Check Valve
- Fuel Filler Cap
- Evaporative Emission System Monitor
- EVAP Running Loss System Leak Test
- On-Board Refueling Vapor Recovery (ORVR) Evaporative Emission (EVAP) System
- Inspection and Verification
- Symptom Chart
- Pinpoint Tests
- Notes
- Pinpoint Test A: DTC P0442 Small Leak In EVAP System Or P0456 Very Small Leak In EVAP System
- Pinpoint Test B: DTC P0455 Major Leak Or No Flow Detected Or DTC P1443 Very Small Or No Purge Flow Detected In System
- Pinpoint Test C: DTC P1450 Excessive Vacuum Detected In The Fuel Tank
- Pinpoint Test D: Hiss When Opening Fuel Cap
- Pinpoint Test E: Excessive Fuel Odor
- Pinpoint Test F: Unable To Refuel (ORVR)
- Evaporative Emission System
- General Procedures
- Canister Vent Solenoid Closing Procedure
- Evaporative Emission System Leak Test
- Evaporative Emission Repair Verification Drive Cycle
- Evaporative Emission Canister
- Evaporative Emission Canister Purge Valve
- Fuel Vapor Control Tube Assembly Valve
- Evaporative Emission Test Port
- Evaporative Emission Canister Vent Solenoid