P0704 - Clutch Switch Input Circuit

P0704 - CLUTCH SWITCH INPUT CIRCUIT

Description:	When the clutch pedal is applied the voltage goes to low. If the powertrain control module (PCM) does not see this change from high to low the DTC is set.
Possible Causes:	Clutch pedal position (CPP) circuit short to voltage Damaged CPP switch CPP circuit open in the SIGRTN
Diagnostic Aids:	When the clutch pedal is applied and then released, the CPP switch voltage should cycle.
Application	Key On Engine Off	Key On Engine Running	Continuous Memory
All	refer to PINPOINT TEST TA .	-	refer to PINPOINT TEST TA .