LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> External Pages >> Different car >> Section 220 (Automatic Transmission) >> In-Vehicle Repair >> Transaxle Support Insulator >> Removal

Transaxle Support Insulator: Removal

WARNING: This page is about a different car, the 2005 Mercury Sable and 2005 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.
  1. With the vehicle in NEUTRAL position it on a hoist. For additional information, refer to JACKING & LIFTING .
  2. Remove the LH wheel and tire. For additional information, refer to WHEELS & TIRES .
  3. Place the high-lift transmission jack under the transaxle.
    Fig 1: Supporting Transaxle With High-Lift Transmission Jack
    G03956851Courtesy of FORD MOTOR CO.
  4. Remove the engine and transaxle upper support insulator nut.
    Fig 2: Removing Transaxle Upper Support Insulator Nut
    G03956852Courtesy of FORD MOTOR CO.
  5. Remove the engine and transaxle upper support bracket bolts and bracket.
    Fig 3: Removing Transaxle Upper Support Bracket Bolts And Bracket
    G03956853Courtesy of FORD MOTOR CO.
  6. Remove the engine and transaxle upper support insulator bolts and insulator.
    Fig 4: Removing Transaxle Upper Support Insulator Bolts And Insulator
    G03956854Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals