Pump Shaft

WARNING: This page is about a different car, the 2005 Mercury Sable and 2005 Ford Taurus. However, it is still accessible from the selected car via links, so may be relevant.

NOTE: Inspect the pump drive shaft in the area that the bearings ride. If worn, install a new shaft and main control.

Fig 1: Removing Teflon® Seals

Courtesy of FORD MOTOR CO.

Remove the Teflon® seals and inspect the shaft.

NOTE: Make sure that the seals are installed correctly.

Fig 2: Identifying Seal Ring Mating

Courtesy of FORD MOTOR CO.

Install 4 new seals on the pump shaft.