LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Piston Pin Bore Diameter

Piston Pin Bore Diameter

NOTE: Refer to the appropriate ENGINE article for the specification.
    WARNING: Since the retainer ring has a tendency to spring out, cover the end of the pin bore with a hand or shop rag when removing the ring. Wear eye protection. Failure to follow these instructions may result in serious personal injury.
    NOTE: Piston and piston pins are a matched set and should not be interchanged.
  1. Measure the piston pin bore diameter in 2 directions on each side. Verify the diameter is within specification.
    2. Fig 1: Identifying Piston Pin Retainer Ring
    GF0000189Courtesy of FORD MOTOR CO.
    Fig 2: Identifying Directions For Measuring Piston Pin Bore Diameter
    GF0000190Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals