LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Taurus SE >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Connecting Rod Bushing Diameter

Connecting Rod Bushing Diameter

NOTE: Refer to the appropriate ENGINE article for the specification.
  1. Use a telescoping gauge to determine the inner diameter of the connecting rod bushing, if equipped.
    2. Fig 1: Measuring Inner Diameter Of Connecting Rod Bushing
    G03885034Courtesy of FORD MOTOR CO.
  2. Measure the telescoping gauge with a micrometer. Verify the diameter is within specification.
    3. Fig 2: Measuring Telescoping Gauge Using Micrometer
    G03885035Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals