Warning Devices

The instrument cluster controls the warning chime function. The warning chime sounds to remind the driver:

• to turn the headlamps off when exiting the vehicle.
• to remove the ignition key when exiting the vehicle.
• to close the doors/decklid after starting the vehicle.
• to fasten the safety belt after starting the vehicle.
• to disengage the parking brake after driving the vehicle.
• to turn off the turn signal after driving the vehicle.

The instrument cluster uses various inputs to determine when to sound the warning chime. The warning chime sounds:

• if the headlamps are left on with the ignition switch in the OFF position and the driver door ajar.
• if the key is in the ignition in the OFF position, with the ignition key removed, and the driver door ajar.
• if a door/decklid is ajar while the ignition switch is in the RUN position.
• the safety belts are not fastened and the ignition switch is in the RUN position.
• the parking brake is engaged while the vehicle is in motion.
• the turn signal is left on for more than 0.8 km (0.5 mile).
• the air bag warning indicator is inoperative when there are diagnostic trouble codes (DTCs) present.