LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Mechanical >> Engine System - General Information >> General Procedures >> Flywheel Inspection

Flywheel Inspection

    NOTE: The flywheel cannot be resurfaced, it must be replaced.
  1. Inspect the flywheel for:
    1. Any cracks.
    2. Worn ring gear teeth.
    3. Chipped or cracked ring gear teeth.
    4. Scratches, nicks and discoloration.
    2. Fig 1: Inspecting Flywheel For Damages
    GF0002365Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals