LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Mustang Base, 2D Convertible, Automatic >> Repair and Diagnosis >> Brakes >> Traction Control >> Brake System - Service Information >> General Procedures >> Component Bleeding >> Hydraulic Control Unit (HCU)

Hydraulic Control Unit (HCU)

NOTE: This procedure is only required when a new HCU is installed.
NOTE: When any part of the hydraulic system has been disconnected for repair or new installation, air may get into the system and cause spongy brake pedal action. This requires bleeding of the hydraulic system after it has been correctly connected. The hydraulic system can be gravity bled, manually bled or bled with pressure bleeding equipment.
  1. Connect the scan tool and follow the anti-lock brake system (ABS) bleed instructions.
  2. Use the pressure or manual bleed procedure(s) to bleed the system. Begin at the RH rear brake caliper.
scientia non olet · About LEMON Manuals