LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus ST >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Disassembly And Assembly Of Subassemblies >> Direct and Reverse Clutch Assembly >> Disassembly

Direct and Reverse Clutch Assembly: Disassembly

WARNING: This page is about a different variant/trim than selected.
  1. Remove the reverse drum snap ring.
    2. Fig 1: Locating Reverse Drum Snap Ring
    GF0039851Courtesy of FORD MOTOR CO.
  2. Remove the sun gear.
    3. Fig 2: Locating Sun Gear
    GF0039852Courtesy of FORD MOTOR CO.
  3. Remove the sun gear thrust bearing.
    4. Fig 3: Locating Sun Gear Thrust Bearing
    GF0039853Courtesy of FORD MOTOR CO.
  4. Remove the direct clutch hub.
    5. Fig 4: Locating Direct Clutch Hub
    GF0039854Courtesy of FORD MOTOR CO.
  5. Remove the direct clutch thrust bearing.
    6. Fig 5: Locating Direct Clutch Thrust Bearing
    GF0039855Courtesy of FORD MOTOR CO.
  6. Remove the direct clutch assembly.
    7. Fig 6: Locating Direct Clutch Assembly
    GF0039856Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals