LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus ST >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> Description And Operation >> Range Selection >> 1 Position

1 Position

WARNING: This page is about a different variant/trim than selected.

In manual selector lever position 1 only 1st gear is selected. In addition to the 1st gear one-way clutch, the transmission control closes the reverse gear brake to produce engine braking effect in overrun.

If the manual selector lever is moved to position 1 at an excessive vehicle speed for 1st gear, the transmission control only allows the downshift to take place when the corresponding vehicle speed has been reached.

scientia non olet · About LEMON Manuals