LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus ST >> Repair and Diagnosis >> Electrical >> Gauges >> Instrument Panel And Console >> Removal And Installation >> Power Point >> Removal

Power Point: Removal

NOTE: Power point cover may differ depending on location.
  1. Open the power point cover.
  2. Install the special tool in one of the power point socket slots.
    3. Fig 1: Installing Special Tool In Power Point Socket Slot
    GF0038824Courtesy of FORD MOTOR CO.
  3. Position the special tool so that it engages in the adjacent slot.
    4. Fig 2: Positioning Special Tool To Engage In Adjacent Slot
    GF0038825Courtesy of FORD MOTOR CO.
  4. Using the special tool, pull the power point socket out of the retainer.
    5. Fig 3: Pulling Power Point Socket Out Of Retainer
    GF0038826Courtesy of FORD MOTOR CO.
  5. Disconnect the electrical connector.
scientia non olet · About LEMON Manuals