LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus ST >> Repair and Diagnosis (Single Page) >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control System - General Information And Diagnostics >> General Procedures >> Spring Lock Coupling >> Connect

Spring Lock Coupling: Connect

  1. Install the spring lock coupling spring.
    2. Fig 1: Identifying Spring Lock Coupling Spring
    G03915811Courtesy of FORD MOTOR CO.
  2. Lubricate the inside of the coupling with PAG oil.
    3. Fig 2: Identifying Coupling Inside Area For Lubrication
    G03889989Courtesy of FORD MOTOR CO.
    CAUTION: Use only the new O-ring seals. The use of any O-ring seals other than those specified in the Ford Master Parts Catalog may result in intermittent leakage during vehicle operation.
  3. Install the O-ring seals.
    4. Fig 3: Identifying O-Ring Seals
    G03945165Courtesy of FORD MOTOR CO.
  4. Connect the spring lock coupling fittings with a twisting motion until the spring lock coupling spring snaps over the flared end of the female fitting.
    5. Fig 4: Connecting Spring Lock Coupling Fittings
    G03889991Courtesy of FORD MOTOR CO.
  5. Install the spring lock coupling clip.
scientia non olet · About LEMON Manuals