Toe Adjustment - Rear
- Jounce the vehicle to make sure that the suspension is in its normal resting position.
- Using alignment equipment and the manufacturer's instructions, measure the toe.
- With the vehicle in NEUTRAL, position it on a hoist. For additional information, refer to JACKING AND LIFTING
article.
- Loosen the rear lower arm adjustment cam nut.
Courtesy of FORD MOTOR CO.
- Adjust the toe setting by rotating the nut and eccentric washer.
Courtesy of FORD MOTOR CO.
- Tighten the rear lower arm adjustment cam nut to 90 Nm (66 lb-ft).
Courtesy of FORD MOTOR CO.
- Recheck the toe settings, adjust as necessary.