LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus SES, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Automatic Transmission External Controls) >> Removal And Installation >> Selector Lever Knob >> Removal

Selector Lever Knob: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Remove the floor console. For additional information, refer to INSTRUMENT PANEL AND CONSOLE article.
    2. NOTE: Selector lever assembly shown removed.
  2. Disconnect the overdrive (O/D) switch electrical connector.
    3. Fig 1: Locating Overdrive (O/D) Switch Electrical Connector
    GF0040024Courtesy of FORD MOTOR CO.
  3. Remove the selector lever knob.
    • Remove and discard the screw.
    • Pull off the knob.
    4. Fig 2: Locating Selector Lever Knob And Screw
    GF0040025Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals