LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus SES, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> In-Vehicle Servicing >> Transmission Range (TR) Sensor >> Removal

Transmission Range (TR) Sensor: Removal

WARNING: This page is about a different variant/trim than selected.
  1. Disconnect the transmission range (TR) sensor electrical connector and the selector lever cable.
    2. Fig 1: Locating Transmission Range (TR) Sensor Electrical Connector
    GF0039738Courtesy of FORD MOTOR CO.
    NOTE: Failure to hold the shift lever while loosening or tightening the manual shaft lever will transmit rotational torque to the TR switch and shift mechanism.
  2. Remove the TR sensor (automatic transaxle shown removed for clarity).
    1. Remove the manual control lever.
    2. Remove the bolts.
    3. Fig 2: Identifying Manual Control Lever And Bolts
    GF0039739Courtesy of FORD MOTOR CO.
scientia non olet · About LEMON Manuals