LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus SES, 2D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 1 (Automatic Transmission) >> In-Vehicle Servicing >> Transmission Fluid Pan >> Installation

Transmission Fluid Pan: Installation

WARNING: This page is about a different variant/trim than selected.
    NOTE: Do not use more than the specified amount of sealer on the pan or internal transaxle damage could occur.
  1. Apply a bead 1.5 mm (0.06 in) thick of sealer to the transmission fluid pan.
    2. Fig 1: Identifying Area For Applying Sealer To Transmission Fluid Pan
    GF0029775Courtesy of FORD MOTOR CO.
  2. Install the transaxle fluid pan.
    • Tighten to 10 Nm (89 lb-in).
    3. Fig 2: Locating Transaxle Fluid Pan Bolts
    GF0039716Courtesy of FORD MOTOR CO.
  3. Lower the vehicle.
  4. Fill the transaxle with clean automatic transmission fluid.
scientia non olet · About LEMON Manuals