LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Focus SES, 2D Hatchback, Automatic >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> Climate Control >> Removal And Installation >> Function Selector Switch >> Removal And Installation

Removal And Installation

  1. Remove the 4 bolts and position aside the lower steering column cover.
    2. Fig 1: Locating Lower Steering Column Cover Bolts
    GF0040410Courtesy of FORD MOTOR CO.
  2. Remove the function selector knob.
  3. Remove the center instrument panel finish panel.
    • Disconnect the cigar lighter electrical connector.
    4. Fig 2: Locating Center Instrument Panel Finish Panel
    GF0040385Courtesy of FORD MOTOR CO.
  4. Detach the function selector switch.
    1. Disconnect the electrical connector.
    2. Remove the screw and detach the function selector switch.
    5. Fig 3: Identifying Function Selector Switch
    GF0040411Courtesy of FORD MOTOR CO.
  5. Detach the function selector cable and remove the function selector switch/cable assembly.
    6. Fig 4: Detaching Function Selector Cable
    GF0040412Courtesy of FORD MOTOR CO.
  6. To install, reverse the removal procedure.
scientia non olet · About LEMON Manuals