LEMON Manuals: Even more car manuals for everyone
Home >> Ford >> 2007 >> Explorer 4.6 8, RWD >> Repair and Diagnosis >> Engine Mechanical >> Exhaust System >> Removal And Installation >> Tailpipe >> Installation

Removal And Installation: Tailpipe: Installation

  1. If reusing the tailpipe, install a new muffler assembly-to-tailpipe Torca® clamp. For additional information, refer to Torca® Clamp .
  2. Position the tailpipe and connect the rubber isolator.
    3. NOTE: Do not tighten the muffler assembly-to-tailpipe Torca® clamp until the exhaust system has been aligned.
    NOTE: Using an abrasive pad, clean the muffler assembly-to-tailpipe surface area of any rust.
  3. Position the muffler assembly-to-tailpipe.
  4. Align the exhaust system. For additional information, refer to Exhaust System Alignment .
scientia non olet · About LEMON Manuals